RackStand Installation Instructions

for Montague 2012 to 2015

STEP 1: Install the Frame Collar

If you have a 2012 – 2015 model year Montague bike with a non-threaded frame collar, remove the existing frame collar by loosening the bolt, spreading it apart, and sliding it up and off.
Install the replacement frame collar. Spread it apart and slide it down over the seat tube so it is pressed against the bushings of the folding joint. Apply downward pressure to the collar. While applying downward pressure, tighten the bolt to 15 Nm.

STEP 2: Attach the Latch

Remove the rear bolt from the front of the latch and re-install it so it passes through the opening in the back of the frame collar. Tighten to 5 Nm.
The new frame collar should be positioned with the bolt toward the front of the bike, and the open hole toward the back as shown above.